Concrete resurfacing · Sacramento and the surrounding valley Driveways · Patios · Pool decks · Garage floors
(916) 908-0547

Concrete resurfacing - Sacramento County

Concrete Resurfacing in Folsom, CA

Folsom had 80,454 residents at the 2020 census and is growing south of Highway 50 in the Folsom Plan Area. Much of the city is mapped on shallow foothill soils over granodiorite and metamorphic bedrock, with rock outcrops in places, which makes digging out an old slab harder than on the valley floor.

Call (916) 908-0547 Get a Written Quote

Bedrock Measured in Inches

Folsom is on the edge of the Sierra foothills at about 220 feet, and the soil survey shows how close rock is. Units mapped here include Andregg, formed from granodiorite with soft bedrock about 81 centimetres down; Auburn and Argonaut, from amphibolite schist and other metamorphic rock, with hard bedrock as shallow as 36 to 41 centimetres; and Whiterock, where bedrock sits about 20 centimetres, roughly eight inches, below the surface. The Auburn-Argonaut-Rock outcrop complex adds exposed stone. Shrink-swell is mostly low, with linear extensibility around 1.5, except in Argonaut and Red Bluff clays. Along the American River and Lake Natoma, the survey maps “Xerorthents, dredge tailings” left by gold dredging.

Why Resurfacing Often Beats Tear-Out Here

Breaking out a slab is only half a replacement job; the other half is digging and grading the base. Where bedrock is eight to sixteen inches down, that excavation is slow and expensive, so a sound slab is often better resurfaced than replaced. The rolling ridges also mean sloped driveways, stepped patios and walks that change grade, where drainage and traction matter more than on the valley floor.

A 1980s-to-Now Housing Stock

Folsom’s median home was built in 1997, and only about 6% of homes predate 1970, according to ACS 2020–2024 data. Of the rest, 19% date from the 1980s, 27% from the 1990s, 26% from 2000 to 2009 and 15% since 2010, in areas like Empire Ranch, Broadstone, Briggs Ranch and American River Canyon. South of US-50, the Folsom Plan Area allows about 11,000 homes on 3,250 acres. Many newer neighborhoods have HOAs, so color and finish changes may need architectural approval. The Sutter Street historic district holds most of the older concrete.

Permits and Coatings

We have not found a published City of Folsom policy on who repairs a damaged sidewalk. Report one through the City’s Report a Problem page or SeeClickFix, and ask Public Works what is needed before work in the street right-of-way. Folsom is in Sacramento County, so sealers fall under SMAQMD Rule 442; reactive penetrating sealers are limited to 350 g/L.

Folsom Projects

Typical work includes resurfacing sloped driveways, overlays on stepped patios and walks, pool deck resurfacing and decorative overlays where an HOA allows them. West along US-50, Rancho Cordova shares the dredge-tailing ground.

Folsom Concrete Questions

Is the ground in Folsom different from the rest of the Sacramento area?
Yes. Valley cities like Elk Grove sit on deep clay and hardpan soils, but the USDA soil survey maps much of Folsom as shallow foothill soils over granodiorite, schist and other metamorphic bedrock, some with rock outcrops. Along the American River and Lake Natoma, some ground is mapped as gold-dredge tailings. Shrink-swell is mostly low here, so slab problems are more often about slope and drainage than about expansive clay.
My Folsom neighborhood has an HOA. Do I need approval before recoloring my driveway?
Check your HOA's architectural guidelines first. Many newer neighborhoods, including much of the Folsom Plan Area south of Highway 50, are built with homeowners associations, and HOAs commonly regulate driveway colors and finishes. Work that extends into the sidewalk or the driveway approach in the street right-of-way is a separate matter for the City of Folsom.

Nearby Areas We Serve

Concrete resurfacing across Sacramento, Placer and Yolo counties:

Fair OaksSacramento County Rancho CordovaSacramento County RosevillePlacer County

Written quote

What needs a new surface?

A quick description is enough to start.

  • A look at the slab before any price
  • A written quote: prep, repair, system, finish
  • A straight answer if it needs replacing instead
  • Cracks and lifted joints dealt with first

What needs a new surface?

Prefer to talk? Call (916) 908-0547.

Got it, thank you.

We will call to set up a time to look at the slab. To talk sooner, call (916) 908-0547